1L Filter Cleaner Soak for Pool and Spa

This filter cleaner is designed to remove dirt, oil, body fats, grease and filth from all types of filters.

Directions for use;

For CARTRIDGE FILTERS;
Spray down filter cartridge with a hose, Soak filter in a pail with a 1:20 ratio of filter cleaner (500mls to 10L) soak for at least 30 minutes.
Remove and hose off filter with highest pressure on hose until clean and then place back into spa.

For Media Filters;
Backwash filter and close inlet valves. With the filter off, remove the Multiport Valve, add the Filter Cleaner to the sand filter at the rate of 500mls per 35,000L Pool.
Put the Multiport Valve back on, leave this OVERNIGHT, DO NOT RUN THE FILTER. The following day, backwash to waster until the sight glass runs clear (approx. 5 -15mins.)