FIX-A-LEAK Pool & Spa Leak Sealer 1L - Stops Leaks Fast
The world's number one selling pool and spa leak sealer. If your pool or spa is losing water and you cannot find the leak, FIX-A-LEAK provides a permanent solution without expensive repairs, draining, or digging. Simply pour it in and let it work.
Product Specifications
| Volume | 1 litre |
| Coverage | Treats pools up to 83,000 litres |
| Maximum Dosage | 1 litre per 19,000 litres of pool water |
| Leak Size | Seals leaks up to 3mm diameter |
| Formula | Concentrated blended sealant |
| Pool Compatibility | Concrete, fibreglass, vinyl, pebblecrete |
| Material Compatibility | PVC, copper, polyethylene, polybutylene, steel, concrete, fibreglass |
| Permanence | Permanent seal |
| Weight | 1kg |
Key Features
- Permanent Leak Repair. Creates a lasting seal that stops leaks for good, not just a temporary patch.
- Works on Multiple Materials. Seals leaks in PVC, copper, polyethylene, steel pipes, concrete, fibreglass, and vinyl.
- No Draining or Digging. Fix hidden leaks in pipes, fittings, and pool shells without costly excavation.
- Seals Leaks Up to 3mm. Effective on cracks, pinholes, and gaps in pipes and pool structures.
- Easy Application. Pour into skimmer with pump running, no special tools or expertise required.
- Safe for All Pool Types. Works in saltwater, chlorine, and mineral pools without affecting water chemistry.
- Treats Pools Up to 83,000 Litres. One 1-litre bottle covers most residential pools.
How to Use
- Step 1: Bypass your filter. Sand filters: set valve to Recirculate. Cartridge filters: remove cartridge. DE filters: remove grids from tank.
- Step 2: Add FIX-A-LEAK. With pump running, slowly pour through skimmer or directly in front of any suction intake.
- Step 3: Direct flow to leak area. Adjust suction to main drain for plumbing leaks, or place vacuum at deepest part of pool. Run pump for 6-8 hours.
- Step 4: Return to normal operation. Reinstall filter media and monitor water level over 24-48 hours. Repeat if leak persists.
Important: Shake well before use. Do not add directly to filter. Bypass filter media during application to prevent clogging.
Recommended Accessories
- 5-in-1 Test Strips - check water chemistry before and after treatment.
- Crystalline Chlorine 4kg - rebalance sanitiser after treatment.
Frequently Asked Questions
Q: Will FIX-A-LEAK harm my pool equipment or water chemistry?
A: No, it is safe for all pool equipment, surfaces, and water types including chlorine, salt, and mineral pools.
Q: How long does it take to work?
A: Most leaks seal within 6-8 hours. Monitor water level for 24-48 hours to confirm the leak is stopped.
Q: Can I swim while FIX-A-LEAK is working?
A: It is best to wait 6-8 hours to allow the product to circulate and seal the leak before swimming.
Q: What if the leak does not stop?
A: Try a second treatment. If the leak persists, it may be too large (over 3mm) or require professional repair. Contact us for advice.
Q: Will it clog my filter?
A: No, when used as directed with the filter bypassed during application, it will not clog your filter.
Q: How long does the seal last?
A: FIX-A-LEAK creates a permanent seal. Once the leak is sealed, it should remain sealed indefinitely.
Q: Can I use this in my spa?
A: Yes, FIX-A-LEAK works equally well in spas, hot tubs, and swimming pools.
Q: Do I need to drain my pool?
A: No draining required. FIX-A-LEAK works while your pool is full.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.
