Aussie Gold Pool Vinyl Repair Kit | Underwater Liner Repair
The Aussie Gold Pool Vinyl Repair Kit lets you fix leaks fast, underwater, without draining your pool. A permanent waterproof patch that bonds directly to wet vinyl for a long-lasting repair completed in minutes. Suitable for pool liners, inflatables, spa covers, and other vinyl surfaces.
What's Included
| Vinyl Patch | 13.5cm x 55cm, can be cut to size for multiple repairs |
| Vinyl Adhesive | 60ml tube, water-resistant underwater adhesive |
Key Features
- Underwater Application. Apply directly to wet vinyl without draining your pool.
- Permanent Waterproof Bond. Strong adhesive designed specifically for underwater use.
- Large Patch Size. 13.5cm x 55cm can be cut to size for multiple repairs.
- Multi-Purpose. Works on pool liners, inflatables, air mattresses, spa covers, and water beds.
- Chemical Resistant. Holds up to chlorine, saltwater, and standard pool chemicals.
How to Apply
- Cut the patch to size, at least 5cm larger than the tear on all sides. Round the corners to prevent peeling.
- Clean the repair area to remove algae, dirt, or debris from around the tear.
- Apply vinyl glue to the patch surface, spread evenly and allow 30 seconds to become tacky.
- Fold the patch in half (glue side in) and submerge to the repair area.
- Unfold and press firmly onto the liner, smoothing out air bubbles from the centre outward.
- Hold firmly for 60 seconds applying consistent pressure for best adhesion.
- Allow 24 hours before heavy use for full cure.
Tip: Round the corners of your patch, square corners are more likely to peel over time. The patch should extend at least 5cm beyond the tear in every direction.
Safety and Storage
- Store in a cool, dry place away from direct sunlight
- Keep vinyl glue away from children and pets
- Avoid contact with eyes, rinse thoroughly with water if contact occurs
- Use in a well-ventilated area when applying glue above water
Recommended Accessories
- FIX-A-LEAK Pool and Spa Leak Sealer 1L - for leaks in pipes and fittings where a patch cannot reach.
- 5-in-1 Test Strips - test water chemistry after any repair work.
- Crystalline Chlorine 4kg - re-sanitise after repair work is complete.
Frequently Asked Questions
Q: Can I apply this underwater?
A: Yes, the vinyl glue is specifically formulated for underwater application. You do not need to drain your pool. Apply the glue to the patch, fold it, submerge, and press firmly onto the repair area.
Q: How big a tear can this repair?
A: Suitable for tears, cuts, and pinholes up to approximately 10cm. For larger damage, multiple patches can be used. For structural damage or very large tears, professional liner replacement may be needed.
Q: How long does the repair last?
A: When applied correctly, the repair is permanent. The waterproof adhesive creates a strong bond that holds up to pool chemicals, UV exposure, and normal pool use.
Q: Can I cut the patch to a smaller size?
A: Yes, the 13.5cm x 55cm patch can be cut to any size needed. Always round the corners to prevent peeling at the edges.
Q: Will pool chemicals affect the repair?
A: No, the patch and adhesive are resistant to chlorine, saltwater, and standard pool chemicals when applied correctly.
Q: What if the repair does not hold?
A: Ensure the repair area was clean before application and that the patch extended at least 5cm beyond the tear. Contact us for advice if the repair fails.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.
