Round Spa Pool Cover Lifter | Suits Spas Up to 42" Height
Make removing and replacing your round spa cover easier with this gas strut assisted cover lifter. The steel frame supports the cover while your spa is open, helping keep it off the ground and reducing unnecessary handling.
Key Benefits
- Designed for round spa pools. A practical way to lift and store a compatible round spa cover.
- Gas strut assisted lifting. Helps reduce the effort required to open and close the cover.
- Suitable for spas up to 42 inches (approximately 1067 mm) high. Check all compatibility and installation requirements before ordering.
- Keeps the cover off the ground. Supports the cover while the spa is open and helps reduce dragging and unnecessary wear.
- Steel construction. Tubular and square section steel frame and arms with a black powder coat finish.
Specifications
| Specification | Detail |
|---|---|
| Product | Round Spa Pool Cover Lifter |
| Intended spa shape | Round |
| Maximum spa height | 42 inches (approximately 1067 mm) |
| Base plate position | Underneath the spa, as shown in the supplied instructions |
| Cabinet fixings | Drilling and screws required at both specified fixing locations |
| Frame material | Steel, with tubular and square section components |
| Finish | Black powder coat |
| Lift assist | Gas strut assisted |
| Hardware | Stainless steel fasteners |
Check Compatibility Before Ordering
Height alone does not confirm compatibility. Your spa diameter, cover dimensions and thickness, cabinet construction, access beneath the spa and clearance for the lifting arms and raised cover all need to be considered.
- Confirm your spa is round and no more than 42 inches (approximately 1067 mm) high.
- Measure the spa diameter and cover dimensions.
- Confirm the base plate can be positioned underneath your spa in accordance with the supplied instructions.
- Check that your spa cabinet is suitable for drilling and screw fixing at both required locations.
- Allow enough clearance around and above the spa for the lifter to move and the cover to remain raised.
- Check your spa manufacturer's requirements for cabinet fixings and support beneath the spa before installation.
If you are unsure, contact Perfect Pools with your spa make, model, measurements and photos before purchasing or drilling. We can help check suitability and obtain further installation advice where needed.
How It Works
The base plate is positioned underneath the spa, and the lifter is secured to the spa cabinet at both fixing locations shown in the instructions. The steel arms support the cover, while the gas strut assists the lifting movement. The cover remains supported off the ground while you use the spa.
Installation Requirements
The manufacturer has confirmed that the supplied installation instructions are correct. Installation requires the base plate beneath the spa and drilling and screwing into the spa cabinet at both locations shown. Follow the supplied instructions for the exact positioning, assembly and fixings.
Frequently Asked Questions
Where does the base plate go?
Underneath the spa, in the position shown in the supplied installation instructions.
Does installation require drilling into the spa cabinet?
Yes. Drilling and screw fixing into the spa cabinet are required at both fixing locations shown in the instructions. These fixings are necessary for stability.
Can I use it without the cabinet fixings?
No. The manufacturer confirms that the lifter will not be stable without the required drilling and screws.
Will it fit my round spa?
It is intended for round spas up to 42 inches (approximately 1067 mm) high. Suitability also depends on your spa and cover dimensions, cabinet construction, access beneath the spa and clearance. Contact us if you need help checking your model.
Can the base plate be installed under any spa?
The plate is designed to sit underneath the spa, but the installation must suit your particular spa's base and support requirements. Check your spa manufacturer's guidance or contact us before proceeding if you are unsure.
Does the gas strut make the cover easier to lift?
Yes. It assists the lifting action and helps reduce the effort needed to open and close the cover.
What if I have a square or rectangular spa?
See our Undermount Cradle Cover Lifter or Spa Cover Lifter up to 2800 x 2800 mm, and check the installation requirements for your spa.
Pair With a Round Spa Cover
If you also need a replacement cover, see our 2040 mm Round Spa Pool Cover. Measure your spa carefully to confirm the correct cover size.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.
