Zodiac DuoX DX3000 Robotic Pool Cleaner | Floor, Walls and Waterline | Up to 10x5m
Full-pool cleaning, floor to waterline. The Zodiac DuoX DX3000 is a premium robotic pool cleaner built for New Zealand pool owners who want thorough, reliable cleaning without the manual effort. With three motors, patented cyclonic suction, and active brushing, the DX3000 covers the floor, walls, and waterline in a single clean, leaving your pool consistently spotless.
Designed for pools up to 10m x 5m, the DX3000 handles a wide range of pool shapes and surfaces, making it one of the most versatile automatic pool cleaners available in NZ.
Technical Specifications
| Pool Size | Up to 10m x 5m |
| Cleaning Coverage | Floor, walls, and waterline |
| Motors | 3 |
| Filtration | Dual-stage, 150 micron and 60 micron |
| Filter Capacity | 4L |
| Cable Length | 15m with anti-tangle swivel system |
| Dimensions | 43cm x 48cm x 27cm |
| Weight | 9.5kg |
| Compatible Surfaces | Concrete, pebblecrete, quartzon, fibreglass, vinyl, tiles |
| Compatible Shapes | Rectangular, oval, freeform, flat, gentle slope, composite slope, diamond |
| Warranty | 2 years (Zodiac) |
Key Features
- Cleans Floor, Walls and Waterline. Complete pool coverage in one cycle, including the waterline where oils and sunscreen accumulate.
- Dual-Stage Filtration. 150 micron filter for large debris and 60 micron filter for fine particles including sand, dust, and algae spores.
- Three-Motor System. Delivers powerful, consistent suction and drive performance across all pool surfaces.
- Patented Lift System. Drains water from the unit as it is lifted, significantly reducing weight and making removal straightforward.
- Anti-Tangle Swivel Cable. 15m cable rotates with the cleaner's movement, preventing tangles during operation.
- Superior Wall Detection. Embedded smart sensors for accurate navigation and smooth floor-to-wall transitions.
- Active Brushing. Front brush configuration actively scrubs surfaces, loosening dirt and algae rather than simply vacuuming over them.
- Patented Cyclonic Suction. Creates a powerful vortex that draws debris into the filter efficiently, maintaining consistent suction throughout the cycle.
Frequently Asked Questions
Q: What pool surfaces is the DX3000 compatible with?
A: Compatible with concrete, pebblecrete, quartzon, fibreglass, vinyl, and tiled pool surfaces.
Q: Does the DX3000 clean the waterline?
A: Yes, the DX3000 cleans the floor, walls, and waterline in a single cleaning cycle.
Q: What size pool is the DX3000 suited to?
A: Designed for pools up to 10m x 5m with a 15m swivel cable.
Q: How does the Lift System work?
A: As you lift the cleaner from the pool, the patented Lift System drains water from the unit automatically, reducing the weight significantly and making removal much easier.
Q: Does it work in saltwater pools?
A: Yes, the DX3000 is compatible with both chlorine and saltwater pools.
Q: How often should I clean the filter?
A: Rinse the filter canister after every use. Deep clean monthly with a filter cleaner soak for best performance.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Visit our contact page.
