Hot Springs C30 Spa Filter | 260 x 150mm | Twin Pack | HS30
Keep your Hot Springs spa running at its best with the Hot Springs C30 Spa Filter Twin Pack. Two compatible replacement cartridges precision-matched to the original C30/HS30 dimensions, capturing dirt, oils, body lotions, and fine debris for clear, healthy spa water. Having two filters allows you to rotate them during cleaning so your spa never runs on a dirty or wet cartridge.
Product Specifications
| Model Number | C30 / HS30 |
| Length | 260mm |
| Diameter | 150mm |
| Top End Cap | 50mm hole |
| Bottom End Cap | 50mm hole |
| Filter Type | Pleated cartridge |
| Quantity | 2 per pack |
| Compatible Models | Hot Springs Aria, Envoy, Jetsetter, Grandee, Prodigy, Solana TZ/RX/SZ, Vista (1990-present) |
| Replacement Interval | Every 12-18 months |
Key Features
- Twin Pack. Two filters included, ideal for rotation cleaning so your spa always runs on a clean, dry cartridge.
- Precision-Matched Dimensions. Exact fit for Hot Springs C30/HS30 filter housing, no modification required.
- Pleated Cartridge Design. Maximises surface area for efficient capture of dirt, oils, and fine debris.
- Wide Compatibility. Suits Hot Springs models from 1990 to present using the C30/HS30 specification.
- Reduces Chemical Demand. Removes contaminants before they break down sanitiser, keeping water balanced longer.
Not sure if this fits your spa? Contact us with your spa model before ordering and we will confirm compatibility.
How to Install
- Turn off the spa pump and isolate power
- Remove the filter housing lid or access panel
- Lift out the old C30 filter cartridge
- Insert the new filter, ensuring it seats correctly in the end cap housing
- Replace the housing lid and restore power
Maintenance Schedule
- Every 2-4 Weeks. Remove, rinse thoroughly with a garden hose, and allow to dry completely before reinstalling.
- Monthly. Deep clean with Filter Cleaner Soak to remove oils, lotions, and mineral build-up that rinsing alone cannot clear.
- Every 12-18 Months. Replace the cartridge for consistent filtration performance.
Tip: Use both filters in rotation, while one is in the spa, clean and fully dry the other before swapping. This extends the life of both cartridges and maintains consistent water quality.
Recommended Accessories
- Filter Cleaner Soak 1L - monthly deep clean to remove oils, lotions, and mineral deposits.
- Filter Cleaning Wand - weekly rinse tool for fast pleat-by-pleat cleaning.
- 5-in-1 Test Strips - test water chemistry regularly alongside filter maintenance.
- Spa Pool Starter Kit - complete water care bundle for spa owners.
Frequently Asked Questions
Q: Will this filter fit my Hot Springs spa?
A: This filter suits Hot Springs models using the C30/HS30 specification including Aria, Envoy, Jetsetter, Grandee, Prodigy, Solana TZ/RX/SZ, and Vista (1990-present). Confirm your current filter measures 260mm x 150mm with 50mm end cap holes. Contact us if you are unsure.
Q: How often should I replace the filter?
A: Every 12-18 months depending on usage. Signs that replacement is due include reduced water flow, persistently cloudy water despite correct chemical balance, or visible wear, tears, or compressed pleats that do not recover after cleaning.
Q: Can I clean and reuse these filters?
A: Yes, regular cleaning extends filter life significantly. Rinse every 2-4 weeks and deep clean monthly with Filter Cleaner Soak. Cartridges will still need replacing every 12-18 months as the filter media gradually loses effectiveness.
Q: Why does this pack include two filters?
A: Running two filters in rotation means your spa always runs on a clean, dry cartridge. While one is in the spa, the other can be cleaned and fully dried before the next swap, extending the life of both filters.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.
