Zodiac SPABOT SB1000 | Cordless Robotic Spa Cleaner | 60-Min Runtime

The Zodiac SPABOT SB1000 is a cordless robotic spa cleaner designed specifically for home spas, hot tubs, and jacuzzis. Powered by a 6Ah lithium-ion battery, it delivers 60 minutes of autonomous cleaning on the floor and seats without cords or external pumps. One-touch operation and a top-load filter make it straightforward to use and maintain.

Product Specifications

Key Features

• Cordless Operation. No cords, no external pump, and no plumbing connections required.
• SPANAV Navigation. Climbs and navigates spa seats and tight corners autonomously.
• 60-Minute Runtime. Covers a full clean cycle for spas up to 3m x 3m on a single charge.
• Float Finish Retrieval. Surfaces the unit automatically when the cycle ends for easy retrieval.
• 100-Micron Top-Load Filter. Traps fine debris and is easy to rinse clean after each use.
• One-Touch Operation. No programming required - press once to start.
• 4-Hour Full Recharge. Ready for the next clean cycle quickly.
• Lightweight at 2.5kg. Easy to lift, store, and transport.

Is This Right for You?

The SPABOT SB1000 is designed for in-ground and portable spas up to 3m x 3m on fibreglass, acrylic, and tiled surfaces. It is not recommended for spas with sharp floor-to-wall transitions or intricate seating and footwells that may obstruct navigation.

How to Use the Zodiac SPABOT SB1000

1. Ensure the battery is fully charged before first use
2. Lower the SPABOT into the spa and position it on the floor
3. Press the power button once to start the cleaning cycle
4. The cleaner will navigate the floor and seats autonomously for up to 60 minutes
5. When the cycle ends, the Float Finish system brings the unit to the surface for easy retrieval
6. Remove the top-load filter, rinse it clean, and recharge the unit ready for next use

Maintenance

Rinse the filter after every use and allow the unit to dry before storage. Recharge fully after each cleaning cycle. Store the SPABOT out of direct sunlight and away from extreme temperatures. Inspect the filter for damage periodically and replace if filtration performance declines.

Recommended Accessories

• Zodiac MX6 Suction Pool Cleaner - for cleaning the main swimming pool alongside your spa.
• Zodiac T3 Suction Pool Cleaner - alternative suction cleaner for pools.
• Filter Cleaner Soak 1L - deep clean your spa filter monthly alongside SPABOT use.
• 5-in-1 Test Strips - test water chemistry after each spa clean.

Frequently Asked Questions

Q: Does the SPABOT work in my spa?
A: The SB1000 is compatible with most in-ground and portable spas up to 3m x 3m on fibreglass, acrylic, and tiled surfaces. It is not suited to spas with very sharp floor-to-wall angles or complex footwell shapes that may trap the unit. Contact us if you are unsure.

Q: How long does the battery last?
A: The 6Ah lithium-ion battery provides up to 60 minutes of runtime per charge, which is sufficient for a full clean cycle in most home spas. A full recharge takes approximately 4 hours.

Q: How do I clean the filter?
A: Remove the top-load filter canister after each use, empty the debris, and rinse it under fresh water. The transparent canister lets you see when it needs emptying without removing it.

Q: Can the SPABOT clean spa seats?
A: Yes - the SPANAV navigation system is designed to climb and navigate spa seats as well as the floor. Performance on seats will vary depending on the shape and angle of your spa's seating.

Q: Is the SPABOT covered by a warranty?
A: Yes - the SPABOT SB1000 is a genuine Zodiac product covered under Zodiac's standard manufacturer warranty. Retain your proof of purchase and contact us if you experience a fault within the warranty period.

Pickup and Delivery

Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.