Zodiac Spa Pipe Cleaner 500ml | Flush Spa Plumbing | Pre-Drain Treatment
Keep your spa's plumbing system clean and free-flowing with Zodiac Spa Pipe Cleaner. Used before each water change, it flushes oils, biofilm, and contaminants from the pipes and jets that accumulate between water changes and are invisible to the naked eye. Regular pipe cleaning is one of the most overlooked but important parts of spa maintenance.
Product Specifications
| Brand | Zodiac |
| Size | 500ml |
| Active Constituent | 80g/L Benzalkonium Chloride |
| Dosage Rate | 100ml per 1,000L of spa water |
| Treatment Time | 1 hour with jets running on full |
| When to Use | Before each water change (every 3-4 months) |
Key Features
- Removes Oils and Biofilm. Flushes contaminants from spa pipes and jets that backwashing and regular sanitising cannot reach.
- Improves Jet Performance. Clear pipes mean better water flow and stronger jet pressure.
- Pre-Drain Treatment. Use before draining and refilling for a clean start with fresh water.
- Easy to Use. Add to water, run jets for 1 hour, then drain.
How to Use
- Remove filters from the spa
- Shut all air valves
- Add 100ml per 1,000L of spa water directly to the water
- Run all jets on full speed for 1 hour
- After 1 hour, loosened debris will collect at the bottom of the spa for easy removal
- Drain the spa completely, rinse the shell, and refill with fresh water
Important: This product is a pre-drain treatment only - do not use in a spa you intend to continue using without draining. Do not swim or soak during or after treatment. Drain the spa fully after the 1-hour treatment cycle.
Safety and Storage
- Store in a cool, dry place away from direct sunlight
- Keep away from children and pets
- Do not mix with other chemicals
- Avoid contact with eyes and skin - rinse thoroughly with water if contact occurs
- Wash hands after handling
- Refer to product label for full safety information
Recommended Accessories
- Filter Cleaner Soak 1L - clean your spa filter at the same time as pipe cleaning for a complete system refresh.
- Spa Pool Starter Kit - complete water care bundle for the fresh fill after draining.
- 5-in-1 Test Strips - test and balance your fresh fill before use.
- Crystalline Chlorine 1kg - sanitise your fresh fill after refilling.
Frequently Asked Questions
Q: How often should I use Spa Pipe Cleaner?
A: Use it every time you drain and refill your spa, which should be every 3-4 months depending on usage and bather load. It is a pre-drain treatment, not an ongoing maintenance product.
Q: Can I stay in the spa while it is working?
A: No - this is a pre-drain treatment only. Do not use the spa during or after the treatment. Drain fully after the 1-hour cycle.
Q: Why do I need to clean the pipes if I sanitise regularly?
A: Regular sanitising keeps the water clean but does not penetrate the biofilm that builds up inside pipes and jets over time. Pipe cleaner breaks down this biofilm at the source, which regular chlorine cannot reach effectively.
Q: Do I need to remove the filters before using?
A: Yes - always remove filters before adding pipe cleaner and clean them separately with Filter Cleaner Soak at the same time.
Pickup and Delivery
Perfect Pools Service Warehouse - 15C Douglas Alexander Parade, Albany, Auckland
Hours: Mon-Fri 9am-4pm | Sat 10am-2pm
NZ-wide delivery available. Charges calculated at checkout.
Questions? Email perfectpoolsnz@gmail.com or visit our contact page.
